Two short formats, published on TikTok and YouTube Shorts, collected here with their transcripts. The screen footage is recorded on the studio as it runs online, with no editing of the result.
ACM 3D Studio turns an aluminium composite facade cassette into a CNC-ready DXF in four moves: pick a relief family, set its parameters while watching the fold in 3D, check the flat pattern with its V-grooves on their layers, then nest the parts on the sheet and export. There is nothing to draw: the unfolding comes from the same computation as the 3D.
The presenter in these videos is a virtual person generated by AI. The studio screens are real recordings of the application.
Facade panels: from 3D model to CNC file in minutes
15 s
ACM 3D Studio in 15 seconds: 39 panel families, from cassettes to mashrabiya screens, live tweaking, 3D folding and a DXF calibrated to the machine.
What you see
The home page and what the machine receives
The catalogue of 39 families
The Miura fold panel folded in 3D
Pricing: free trial
Transcript
Facade panels to CNC files in minutes. Honestly — ACM 3D Studio. Thirty-nine panel families, from cassettes to mashrabiya screens. Tweak it, it folds in 3D, and the DXF’s calibrated to your machine. Free to try — link in bio.
Miura fold: from relief setting to a DXF nested on the sheet
15 s
15-second screen demo: pick the Miura fold, push the depth and watch the panel refold, switch to the flat pattern with V-grooves, nest three parts on a 1220 × 2440 sheet and export the DXF.
What you see
Pick a family
Set the relief: the fold is recomputed
Flat pattern and V-grooves on their layers
Sheet nesting, DXF ready
Transcript
Still unfolding facade cassettes by hand? Watch. Pick a Miura fold, push the depth — it refolds live. Switch to flat: every V-groove’s already on its layer. Nested on the sheet, the DXF is ready. ACM 3D Studio — free to try.