Family catalogue
Each family is a parametric panel: pick it, set its parameters in the studio, export the CNC-ready DXF (contour, V-grooves per layer, drillings), the cut sheet and the sheet nesting.
Façade cassettes34
Flat cassettefreeFaçade cassette with a flat panel, 90° returns on four sides and fixing tabs. The base family.
Perforated cassetteproFlat cassette with parametric round perforation: grid or staggered, pitch, diameters and gradient (linear along a direction, or radial). Standard returns and tabs.
Single-slope cassettefreePlateau tilted on one axis, no fold: one edge in the base plane, the opposite edge raised. Laid in rows these cassettes form scales.
V cassettefreeCentral re-entrant or protruding fold, vertical or horizontal, at an adjustable position: two flat slopes. Aligned, the cassettes draw continuous flutes.
Truncated pyramid cassettefreeRaised central plateau surrounded by four trapezoidal slopes, each of adjustable width (zero = plateau to the edge). Slits at the plateau’s inner corners.
Trapezoidal plateau cassetteproA raised plateau whose top and bottom edges differ in width: the flanks slant in plan and the relief takes a direction, like a buttress. Adjustable widths, height and position; the top and bottom slopes stay planar, the flanks fold into two facets each.
Hexagonal plateau cassetteproRaised hexagonal plateau at the centre of the panel, joined to the edges by ten facets. Adjustable plateau size and height; six short slits at the plateau corners, returns split mid-way on the left and right edges.
Mansard pyramid cassetteproDouble-slope truncated pyramid with a mansard profile: a steep slope from the edge, a break, then a gentle slope up to the plateau. Adjustable widths and heights of both slopes; eight short corner slits. A deep relief catching the light on two registers.
Perforated trapezoidal prismproNarrow raised plateau between two long trapezoidal slopes, facets perforated as a triangular truss. Height, plateau width and hips are adjustable.
Diamond cassettefreeFull pyramidal relief: four triangular facets rising to an apex, centred or offset. One V-slit to the nearest corner, returns and tabs on four sides.
Drilled diamond cassetteproPyramidal relief whose four facets carry round holes in a gradient: the diameter follows the distance to the apex. Pitch, diameters, pattern and gradient direction are adjustable.
Perforated diamond cassetteproPyramidal relief with facets perforated as a triangular truss: density, bar width and fold margin are adjustable. Light and cast shadow on the façade.
Twin diamond cassetteproTwo or three pyramids side by side on a single cassette, separated by a front-grooved valley. Apex height and position adjustable, in line or zigzag: one part, one mounting.
Eight-facet pyramid cassetteproEight-facet pyramid: the apex meets the four corners and a lifted point on each edge, giving a zigzag edge and alternating facets. Adjustable point position and lift, offsettable apex. One slit to the nearest edge.
Ridge cassettefreeRaised horizontal ridge: two trapezoidal slopes and two triangular hips. Ridge length, position and offset are adjustable; full width possible.
Chevron cassetteproA V-shaped broken ridge: two ridge ends and an offset central point, at adjustable height. Free ridge length and chevron offset; laid in turned rows, the pattern becomes a continuous zigzag.
Diagonal-fold cassettefreeA single fold from corner to corner, protruding or re-entrant: two triangular facets. Rotated by quarter turns, the cassettes compose chevrons and lozenges.
Perforated diagonal foldproA corner-to-corner fold with, on the main facet, a grid of round holes whose diameter shrinks along the diagonal. Perforated facets, pattern, pitch and gradient are adjustable.
Twin diagonal slope cassetteproA fold crosses the cassette from corner to corner and splits it into two half-triangles; each half rises into a three-facet pyramid around its own apex. Two slopes separated by a clean valley, six facets, one slit per apex. The most widespread relief pattern on ACM façades.
Diagonal ridge cassetteproA ridge carried by two lifted points on a diagonal, the four corners at base level: six facets, two opposing slopes at the centre and four from the edges. The relief reads as a lightning bolt and shifts sharply with the hour — the highest-contrast cassette in the catalogue at equal depth.
Diagonal band cassetteproA tilted band between two parallel oblique folds: one side in the base plane, the other raised. Band angle, width and position are adjustable.
Star cassetteproFour-point star: ridges from the apex to the lifted corners, valleys to the edge midpoints. Eight facets, one slit, zigzag edge with split returns.
Four-notch star cassetteproA four-point star on a plain rectangular outline: the central apex falls in sharp ridges to the four corners, while four notches pinched below the base plane open the valley towards each edge midpoint. Sixteen facets, a straight edge, flat returns.
Carved star cassetteproThe four-point star carved INTO the panel: the centre sinks to the bottom of a hollow, four valleys dive into it from the corners, and four points rise at the middle of the sides. Plain rectangular outline, sixteen facets, grooves on the visible face.
Fan cassetteproPleats radiating from a corner or from the centre to a zigzag edge: a fan pleating with adjustable pleat count and height.
Perforated fan cassetteproThe pleated fan, its facets drilled with small circles in a staggered pattern: the relief keeps its shadows, the perforation lets light through. Diameter, pitch, pattern and gradient adjustable; holes too close to a fold or an edge are removed and reported.
Sunburst fan cassetteproThe pleats start from the middle of one edge and radiate to the three other sides: a rising sun in relief. Straight origin edge, three zigzag edges, adjustable ray count and height.
Graduated fan cassetteproThe corner fan whose pleats grow one after another: from the first, almost flat, to the last, at full height. A crescendo that gives the façade a wave-like movement. Start and end heights, direction and pleat count adjustable.
Carved fan cassetteproThe corner fan carved into the panel: the pleats go in instead of out, the zigzag edge dips behind the face, ridges become valleys. Adjustable pleat count and depth.
Faceted hexagonal cassetteproHexagonal cassette: a central apex meeting the six vertices, every other one lifted — facets alternate and the part maps onto itself every third of a turn. Laid in a honeycomb, one cassette rotated builds the whole wall.
Starred triangular cassetteproTriangular cassette: the central apex meets the three corners and the three edge midpoints, every other group lifted — six alternating facets, three ridges, three valleys. Alternating point-up and point-down, it tiles a whole wall with no waste between parts.
Carved starred triangular cassetteproThe six-facet triangular star, carved into the panel: the centre sinks into a hollow, three alternate points dip halfway, ridges and valleys swap. Alternating point-up and point-down, it tiles a wall with no waste.
Triangular plateau cassetteproA flat raised triangle in the centre, joined to the three sides by three sloping flanks: the truncated pyramid as a triangle. Plateau size and position adjustable, flanks always flat. Alternating point-up and point-down, it tiles a wall with no waste.
Sloped triangular cassetteproA single flat, tilted face: one side in the wall plane, the tip raised — or the reverse. Laid head to tail, point up then point down, they form a sawtooth façade that catches the light row by row, with no waste between parts.
Decorative panels5
Faceted wavefreeArc-based wave approximated by planar facets with a uniform fold angle — one cutter for the whole panel. Adjustable amplitude and period, edge-to-edge match between adjacent panels. Concave folds grooved on the visible face.
Mashrabiya screen cassetteproFlat cassette cut with a mashrabiya pattern: eight-point stars and lozenges, honeycomb or lattice. Screen, sun shade or façade screen. Adjustable pitch, bar width, frame and gradient; only whole cut-outs are placed, centred on the panel.
Folded ribbonproA tall, narrow strip folded in a zigzag: triangles tipping one after another and light sliding down the whole height. Wall sculpture, column cladding or, side by side, pleated cladding. Adjustable fold count, depth and diagonal slant.
Pyramid mosaic panelproA row of small pyramids per cassette; laid row upon row, they build a mosaic of diamond points on the wall, each catching the light its own way. Adjustable pyramid count, height, point position and rhythm. One slit per point, closed when folded.
Miura fold panelproThe Miura origami fold: a grid of lozenges folded into chevrons, drawing rows of stepped cubes on the wall. One sheet, no slit: every vertex is developable. Adjustable chevron and tier count, angle and depth.
